English - 11
Plug & Play Feature
1 If the television is in standby mode, press the POWER () button
on the remote control. The message to start Plug & Play is displayed.
2
The Language menu will automatically appear after several seconds.
3 Select the appropriate language by pressing the
… or †
button.
Press the ENTER/OK () button. The message to check the connected
status of the antenna is displayed.
4 Make sure that the antenna is connected to the TV.
Press the ENTER/OK () button. The Country menu is displayed.
5 Select your country or area by pressing the
… or †
button.
Press the ENTER/OK () button. The menu to select channels is
displayed.
6 To start channel store, press the ENTER/OK () button.
The search will end automatically. The TV will begin memorizing all of the
available channels.
Press the ENTER/OK () button to set the clock.
7 Press the œ or √ button to select the hour or minute.
Set these by pressing the
… or †
button.
➢
You can enter the hours or minutes by using the numeric buttons on the
remote control.
8 Press the ENTER/OK () button to confirm your setting.
The DTV channel scan menu appears and the DTV channel is automatically
updated.
➢
If the DTV channel is updated, the Source in the source list of the Input
menu is automatically changed to DTV.
➢
For detailed descriptions about DTV channel update, refer to page 45 of
this manual.
If you want to reset this feature …
1 Press the MENU () button to display the menu.
2
Press the … or † button to select Setup, then press the
ENTER/OK ()
button.
3 Press the ENTER/OK () button again to select Plug & Play.
The message to start Plug & Play is displayed.
When the television is initially powered on, several basic customer settings proceed automatically and subsequently.
The following settings are available.
Check antenna input.
OK
Plug & Play
Enter Skip
Clock Set
--
:
--
Plug & Play
Enter Skip
Start Plug & Play
OK
Plug & Play
Enter Exit
Move Enter Skip
Plug & Play
Language
English
Deutsch
Français
Italiano
Svenska
Move Enter Skip
Plug & Play
Country
Belgium
France
Germany
Italy
Enter Skip
Plug & Play
Auto Store
P1 C
--
40 MHz
0 %
Start
Clock Set 00 : 00
Plug & Play
Move Adjust Enter Skip
Setup
Move Enter Return
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
More
TV
Plug & Play
Skip
Scanning for digital services...
Services found : 24 Channel : 38
35%
Stop
.
BN68-00889Q-01Eng(UK) 8/28/06 11:22 AM Page 11