Filter
Top Products
55
ENG
Troubleshooting
Before contacting Service Personnel, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
PDP and contact your local dealer.
Possible Solution
◆ Check all wire connections.
◆ The monitor is using its power management system.
Check the power management utility on your computer.
◆ Press the SELECT button to put your remote control in the
Monitor mode.
◆ Make sure the wall outlet is working.
◆ Check to see that both the monitor and the source are plugged in
and turned on.
◆ Adjust the Picture settings.
◆ Adjust the Size settings.
Problem
Poor picture.
The power indicator is amber blinking.
Your remote control does not operate
the monitor.
The monitor won’t turn on.
There is no screen image.
The image is too light or too dark.
The image is too large or too small.