Filter
Top Products
13
ENG
Connecting Speakers
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP
matching the “+” and “
-
” ends of the cable with the diagram on the PDP.
Connecting PDP and Speakers
Fix the bracket onto the guide pole
located on the rear of speaker
and fasten the screws.
After removing the three screws
on the PDP, clamp the speaker
and the PDP together and fasten
the screws.
Guide pole
Guide pole
Connecting Stand and Speakers
Guide pole
➢
The speakers MUST have more than 7watts rating (impedance 8Ω).
➢
When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the bracket
clamping the speaker and your PDP together and result in a drop of your PDP and a risk of personal
damage and injury.