Filter
Top Products
33
Setup and Reset
Safety Screen
The screen protection feature allows you to prevent image retention on the screen when a
stationary image is displayed on the product screen for a long period of time.
Setting Pixel Shift
1. Press [
m
] on the product.
2. Move to Setup using the [ ] buttons. Next, press the [ ] button.
3. Move to Safety Screen using the [ ] buttons. Next, press the [ ] button.
4. Move to Pixel Shift using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Enter Return
Pixel Shift : 해제
Horizontal : 4
Vertical : 4
Time : 4 min
Pixel Shift
Pixel Shift
Off
On
Move
• Pixel Shift: To prevent after-images on the screen, you can use this function to have pixels move on the
LCD in the Horizontal or Vertical direction.
• Horizontal: Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4.
• Vertical: Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4.
• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
5. Congure the settings as required using the [ ] buttons.
Conguring Timer
1. Press [
m
] on the product.
2. Move to Setup using the [ ] buttons. Next, press the [ ] button.
3. Move to Safety Screen using the [ ] buttons. Next, press the [ ] button.
4. Move to Timer using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Enter Return
Timer : 동작
Mode
:
Period
: 1 Hour
Time : 10 sec
Timer
Timer
Move
Off
On
• Timer: You can set the timer for Screen Burn Protection.
The image retention elimination mode automatically deactivates after a specied period of time.
• Mode: You can change the Safety Screen Type.
Bar
/ Eraser / Pixel
• Period: Use this function to set the execution period for each mode set in the timer.
• Time: Within the set period of time specify a time for execution.
10 sec / 20 sec / 30 sec / 40 sec / 50 sec
5. Congure the settings as required using the [ ] buttons.