Your television has several settings which allow you to control
picture quality.
1 Press the MENU
()
button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Press the ▼ or ▲ button to select Custom.
5 Press the ENTER () button.
Result
: The options available in the Custom group are
displayed.
6 Press the ▼ or ▲ button to select the option (Contrast,
Brightness, Sharpness, Colour or Tint-NTSC only) to be
adjusted. Press the
œ or √ button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or √
button.
7 When you have finished, press the EXIT ( ) button to exit.
➢
◆ If you make any changes to these settings, the picture
standard is automatically switched to
Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 45.)
Adjusting the Picture Settings
Contrast 90
Move Enter Return
Picture
Mode : Dynamic
Custom
√√
Colour Tone : Normal
Size : Normal
Digital NR : On
††
More
TV
Move
œœ √√
Adjust Return
Custom
Contrast
œœ
90
√√
Brightness : 50
Sharpness : 60
Colour : 50
TV
English-22
AA68-03336A-01Eng 6/28/04 4:08 PM Page 22