Filter
Top Products
English - 7
☛
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
ANT IN
75Ω Coaxial connector for Aerial/Cable
Network.
2
HDMI IN 1
Connect to the HDMI jack of a device with
HDMI output.
3
PC IN / AUDIO
Connect to the video and audio output jack on
your PC.
4
SERVICE
Connector for service only.
5
COMPONENT IN 1, COMPONENT IN 2
Video (Y/P
B
/P
R
) and audio (AUDIO R/L) inputs
for Component.
6
AV IN 1(VIDEO / AUDIO R/L)
Connect RCA cable to an appropriate external
A/V device such as VCR, DVD or Camcorder.
7
AUDIO OUT(AUDIO R/L)
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
8
HDMI IN 2
- Connect to the HDMI jack of a device with
HDMI output. These inputs can also be used
as a DVI connection with separate analog
audio inputs.
An optional HDMI/DVI cable will be necessary
to make this connection. When using the
optional HDMI/DVI adapter, the DVI analog
audio inputs on your TV allow you to receive
left and right audio from your DVI device.
(Not compatible with PC)
- When connecting this product via HDMI or
DVI to a Set Top Box, DVD Player or Games
Console etc, make sure that it has been set
to a compatible video output mode as shown
in the table below. Failure to observe this may
result in picture distortion, image breakup or
no picture.
- Do not attempt to connect the HDMI/DVI
connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being
displayed)
DVI IN (HDMI 2) AUDIO R/L
DVI audio outputs for external devices.
9
POWER IN
Connect the supplied power cord.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz X X X O O O
HDMI/DVI 60Hz X O X X O O
Component O O O O O O
➢
The product colour and shape may vary depending on the model.
Rear Panel
8
3
57
1
4
or
9
6
2
Cable Television
Network
or
BN68-01131D-01Eng.indd 7 2007-03-21 ｿﾀﾈﾄ 7:20:48