Samsung PS50Q91H Flat Panel Television User Manual


 
English - 32
Input Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Video
Signal
Resolution
(Dot X Line)
Vertical
frequency
(Hz)
Horizontal
frequency
(kHz)
Vertical
polarity
Horizontal
polarity
PS42Q91H/
PS42Q92H/
PS42C91H
PS50Q91H/
PS50Q92H/
PS50C91H
IBM PC / AT
Compatible
640 x 350 70.086 31.469 N P
720 x 400 70.087 31.469 P N
640 x 480
59.940 31.469 N N
70.000 35.000 N/P N/P
72.809 37.861 N N
75.000 37.500 N N
800 x 600
60.317 37.879 P P
70.000 43.750 N/P N/P
72.188 48.077 P P
75.000 46.875 P P
1024 x 768
60.004 48.363 N N
70.069 56.476 N N
72.000 57.672 N/P N/P
75.029 60.023 P P
1360 x 768 60.015 47.712 P P
(N: Negative / P: Positive)
The interlace mode is not supported.
The television might operate abnormally if a non-standard video format is selected.
480i/p, 576i/p, 720p, or 1080i is not available in PC mode.
For the PS42Q91H/PS42Q92H/PS42C91H, PC text quality is optimum in XGA mode (1024 x
768@60Hz).
For the PS50Q91H/PS50Q92H/PS50C91H, PC text quality is optimum in WXGA mode (1360 x
768@60Hz). (The three pixels each on the left and right are grayed at the resolution setting of 1360 x
768@60Hz. This is not a mechanical problem but a result caused by the pixel difference between the
standard resolution and the PDP panel.)
BN68-01294D-01Eng_0517(´Üº»).indd 32 2007-10-08 ¿ÀÈÄ 1:52:04