Filter
Top Products
109
Screen Adjustment
4
4 Screen Adjustment
z L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
z 3D 2D (Off / On): Displays the image for the left eye only.
This function is deactivated when 3D Mode set to “2D 3D” or Off.
z 3D Auto View (Off / Message Notice (or Message Alert) / On): If 3D Auto View is set to On, a
“Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D.
If you set 3D Auto View to Message Notice (or Message Alert), a pop up message window
appears when the product receives a 3D signal.
If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually
select a 3D Mode using the corresponding menu.
z 3D Optimize (or 3D Optimisation): The overall adjustment of 3D effect.
Support resolution (16:9 only)
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen
mode.
How to watch the 3D image
z Method 1
Some 3D modes may not be available depending on the format of the image source.
To watch in 3D, wear 3D Active Glasses and press the power button on the glasses.
1 Press the MENU button on your remote, use the or button to select Picture, and then
press the [ ] button.
2 Use the or button to select 3D, and then press the [ ] button.
3 Use the or button to select 3D Mode, and then press the [ ] button.
4 Using the or buttons on your remote control, select the 3D Mode of the image you want
to view.
Resolution Frequency (Hz)
1280 x 720p 25 / 50 Hz
1920 x 1080i 25 / 50 Hz
1920 x 1080p 25 / 50 Hz