Filter
Top Products
English-9
Viewing the Connection Panel (continued)
ΠConnecting an Aerial or Cable Television Network
(depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
-Acable television network
-Asatellite network
´ Connecting Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
-Connect the stereo audio cable to ”Audio (ST)” on the rear of your set and the other end to “Audio Out” of
the sound card on your computer.
- If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to
the driver installation instructions included with your CD package.
➣
15 Pin D-SUB connector
Pin Separate H/V Composite H/V Sync-on-green
1 Red (R) Red (R) Red (R)
2 Green (G) Green (G) Green (G) + Horizontal/Vertical sync.
3 Blue (B) Blue (B) Blue (B)
4 Grounding Grounding Grounding
5 Grounding (DDC) Grounding (DDC) Grounding (DDC)
6 Red (R) Grounding Red (R) Grounding Red (R) Grounding
7 Green (G) Grounding Green (G) Grounding Green (G) Grounding
8 Blue (B) Grounding Blue (B) Grounding Blue (B) Grounding
9 No connection No connection Not used
10 Sync Grounding Sync Grounding Sync Grounding
11 Grounding Grounding Grounding
12 Data (DDC) Data (DDC) Data (DDC)
13 Horizontal sync. Horizontal/Vertical sync. Not used
14 Vertical sync. Not used Not used
15 Clock (DDC) Clock (DDC) Clock (DDC)